Get in touch with us

It depends on the material and the type of cut. The practical thing is to send us the size, gauge and quantity you need: in the same quote we will tell you whether a dedicated run makes sense or whether it is better to schedule it alongside another lot of the same material.

We work as a service center: we can process the coil you already own or source the material. Write to us with the material, gauge and volume and we will confirm which arrangement suits you.

The cut-to-length line turns the coil into flat sheets of a given length. Slitting divides a wide coil into narrower strips that are still coils. If your process feeds sheet by sheet, you need cut to length; if it feeds from a continuous coil, you need slitting.

In carbon steel, from 0.45 mm to 3.5 mm thick; in aluminum and stainless, up to 2.5 mm. Width reaches 1,350 mm on the cut-to-length line and 1,320 mm on the slitting line, and length runs from 400 to 4,000 mm.

Lead time depends on line load, on the material and on whether the coil is already on the floor. We give you a committed date with the quote; for recurring projects we can reserve capacity by program.

We coordinate deliveries within Tijuana's industrial zone and the rest of Baja California. We are at Calle Campos 17151, on the Libramiento, so most of the city's industrial parks are minutes away.

When the coil arrives with a producer certificate, we pass it along with the material identified by heat number. If your end customer requires traceability, tell us at the quoting stage so we plan the run that way from the start.

Yes. We would rather you see the line before sending us a large lot. Schedule your visit by phone at (664) 977-7814 or through the contact form.